 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| WWW.PHIHONG.COM PSM500 500W 1U RPS and Bulk n+1 Power Supply with active PFC Features * * * * * * * * * SELV Output with 1500VAC Isolation 500 Watts X 3 in 1U 19" Rack Hot Plug N+1 * * * * * * Diagnostics Full Protection OTP, OCP, OVP 85-265VAC with Active PFC Applications Power Over Ethernet Telecommunications Network Redundant Power Source Servers Safety Approvals cUL/UL CE TUV Mechanical Characteristics Length: 300mm (11.81in) Width: 107mm (4.21in) * * Height: 41mm (1.61in) Weight: 1.81kg (4lb.) Output Specifications Load Model DC Output Voltage 50V (main) 12V (stand by) 56V (main) 12V (stand by) Min. 0A 0A 0A 0A Max. 10A 1.5A 9A 1.5A Regulation Line 0.5V 0.5V Load Ripple (1) P-P (max) 1% 1% PSM500-210 PSM500-216 Note: (1) Measured with by-pass capacitors 0.1uf/10uf at output connector terminal and oscilloscope set at 20Mhz. Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications. PSM500-210, -216 Characteristics INPUT: AC Input Voltage Range 85 to 264VAC WWW.PHIHONG.COM EMC FCC Class B EN55022 conducted Class B *with external filter (*measured with Y capacitors 0.01uf/400Vat main output connector terminal from V to unit chassis) EN55022 conducted Class B; radiated Class A (using 3 x PSM500-210,or -216 in rack "PSA1554-605") AC Input Current 6A(RMS) max. for 115VAC 3A(RMS) max. for 230VAC AC Input Line Fuse 10A / 250V Isolation Test Primary to Secondary: 4242VDC Primary to Ground: 2121VDC Secondary to Ground: 2121VDC Leakage Current 3.5mA max. @ 254VAC 60Hz AC Input Frequency 47-63Hz Immunity EN50082-1 ESD: EFT: Surge: CS: Voltage Dips RS: Harmonic: EN61000-4-2. Level 3 EN61000-4-4. Level 2 EN61000-4-5. Level 3 EN61000-4-6. Level 3 EN61000-4-11 EN61000-4-3. Level 3 EN61000-3-2 AC Inrush Current 30A(RMS) max. for 115VAC 60A(RMS) max. for 230VAC OUTPUT: Efficiency 83% typical at max. load (115VAC) 85% typical. at max. load (230VAC) FEATURE: Front Panel LED DC Good, Fault condition Hold-up Time 10mS min. 120VAC and max. load 50V Enable/Disable Non latching - remote on/off pin Over Voltage Protection OV set at 57~60V - latching. Thermal Shutdown Latching Over Current Protection Protection against short circuit. Isc max 110%-140% full load current. The 50V, 56V can operate in current mode till shot circuit and can be shorted permanently without damage. Fan Fail Latching Load Sharing 10% at full load ENVIRONMENTAL: Temperature Operation Non-operation 0 to +50C -30 to +70C Isolated Diode Internal Oring Diode located on main (-) output section. Output Connector Humidity Operation 8 to 90% Molex p/n 15060141 or equivalent Molex p/n 15249144 or equivalent (mating) Dimension Diagram Unit: mm (inch) |
Price & Availability of PSM500-210
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |